need some info

[ilovecops]

Im wanting to get into some scca racing. I was wondering about some set ups. I am probaly getting some billstien struts and shocks, and some H&R springs, i all ready have control arms and am getting subframes, but what about a torque arm or panhard bar, just wanting some advise. Thanks

[dtheo]

http://www.griggsracing.com/

The suspension parts you need will be at this site. I would think you need a torgue arm and panhard bar. I have them, does well for stangs, stock stangs were not meant for roadcourses, only straights. Also, http://kcautox.com/forums/viewforum.php?f=1&sid=b3edf754292b340c0b9d5808658e7def

That site is the Kansas City SCCA club. I am a national member, but I need to get more involved. Good luck and say good bye to your savings account, its making me broke!!$$

Dave

[99cobra2881]

Go ahead and put a set of full length subframes on your car, check the brake pads, flush the brake fluid and make sure you've got a good set of tires. Learn to drive the car first then mod the car. It's the nut behind the wheel that makes the laps times lower.