86Stanger
April 9th, 2006, 08:08 PM
:shrug: I have all the proper wires hooked up for converting my 86 over to mass air. one little minute problem...the computer is not reading the mass air meter. I have power to the meter but no reference power <5 volts>. So idle is crap, part throttle is crap...full throttle...AWESOME ! the only thing I can come up with is that I did not run a lead from the fuel pump relay to the computer <fuel pump monitor> and I also did not wire in the speed sensor to the computer also...I have tried other computer modules and a different mass air meter to be safe. Any suggestions would be great...cause if this isnt going to work I'll be selling the intake and computer crap to go to carb!!!!