Which one is my tach wire on a 96 Cobra?

[96cobravert]

I have got everything pretty much done on my nitrous system and finally to the last few details. Need to know where to hook up my DynoTune Two Stage RPM Window/TPS Switch. I am pretty sure the TPS goes to the middle wire (Gray), but I can't for the life of me find out where the tach wire hooks up to!!! Any help would be most helpful!!

I just tryed my new dual purge coming out of the nostrils in the hood and it was awesome!!! So I am officially ready to finish up the last little bit of wiring and get out to SuperTune for a 4.10 gear install and my tune and get this thing out to KCIR ASAP!!!

Edelbrock 80hp Dry w/ Hobbs FPS
DynoTune Two Stage RPM Window/TPS switch
Nitrous Outlet Dual purge-(coming out of hood nostrils)
DynoTune Automatic Bottle heater
Edelbrock Bottle Blanket
Also installing Autometer fuel pressure gauge and Kirban FPR

[PNY UP]

Here's a wiring diagram for a 99-04 to set up a tach. It references the tach wire as pin 34 in the main harness, it's location underhood is in the second pic. Hope that helps.

[PNY UP]

Here's the link for the writeup. The pics didn't copy verry well.

http://www.gotstang.com/howtos.php?howtoid=63&step=3#jump

[Neb50]

On the 96 cobra, you should be able to hook up to pin 48 (O/W) at the computer. That is the tach output and you should not need a tach adaptor.

[96cobravert]

I ended up finding this link http://www.superstallions.com/tech/elect/96-98shiftlite/96_98shiftlite.html . I liked the pictures and a step by step. Thanks for the help guys!!!

[PNY UP]

Congrats. Glad Joe stepped in so I didn't lead you down the wrong path.