PDA

View Full Version : Drag Radials...

Saleen Guru
February 2nd, 2006, 04:14 PM
Looking for Marty's Phone number...I think he has some 18 inch Drag Radials. I was going to Get 17inch Mickey's ( from Mike York) and some rims but gotta cut cost and just go with 18's (I have 18inch wheels) I lost his PM when the site changed over. Forgot to save it. Let me know if you have any new or used 18 inch Drag radials...BFG's preferably. PM me...thanks!
PNY UP
February 2nd, 2006, 05:06 PM
I heard this guy named Tirerack has some. If he doesn't have any, try his buddies JEGS or Summit... :slap: :smilielol:
Kinger
February 2nd, 2006, 05:08 PM
I heard this guy named Tirerack has some. If he doesn't have any, try his buddies JEGS or Summit... :slap: :smilielol:
Doh!:dummy: :slap:
PNY UP
February 2nd, 2006, 05:10 PM
I don't open doors...I just walk through 'em.
Saleen Guru
February 2nd, 2006, 06:56 PM
I'll just make sure they are only big enough for me to walk through....:HittingHead:

[ ]

Ha Ha...See if you can get through that spanky! :wave1: < that's me on the other side! :evilflip: lol...
PNY UP
February 2nd, 2006, 07:52 PM
OOOOOOOOH....fat guy jokes eh?

OK...That sure is a pretty red car you have there...looks really neat in my rear view mirror! :smilielol:
Saleen Guru
February 2nd, 2006, 08:06 PM
Fat guys jokes?...you might have 15 lbs on me so No fat guys jokes...put's me in the same catagory...and me a no a likey that catogory!
PNY UP
February 2nd, 2006, 08:10 PM
Well I hate to admit it, but I probably have 15 pounds on you- per limb! But the vert went on a diet this winter to make up for it...:pimp1:
Saleen Guru
February 2nd, 2006, 08:19 PM
OOps.. was that a 1..hmmm thought I hit the 7..


You my friend have been schooled on a set up...You walk through doors...I change the room in which you walk into....BBBAAAGHHHHHHH :spit:

All seriousness aside... When are you going to launch like Kinger and run 12.30's...I know you can do it...
PNY UP
February 2nd, 2006, 08:22 PM
Launch like Kinger? Never. I admire what he was able to do with that car last year, but my approach is a little different.

12.30's? :pimp1:
Kinger
February 2nd, 2006, 08:23 PM
OOps.. was that a 1..hmmm thought I hit the 7..


You my friend have been schooled on a set up...You walk through doors...I change the room in which you walk into....BBBAAAGHHHHHHH :spit:

All seriousness aside... When are you going to launch like Kinger and run 12.30's...I know you can do it...
He's in an automatic!! And to let you know, I dropped my 2-step down to 4,000rpm instead of 5,000! Figured I didn't need to leave that hard now that I actually have a top end!! WooHoo!!
Saleen Guru
February 2nd, 2006, 08:25 PM
Launch like Kinger? Never. I admire what he was able to do with that car last year, but my approach is a little different.

12.30's? :pimp1:


What's been your best so far...didn't you run a 12.4 in Topeka?
Saleen Guru
February 2nd, 2006, 08:26 PM
And What I respect is YOU...running 12's on factory Goodyears...:hail:
PNY UP
February 2nd, 2006, 08:28 PM
What's been your best so far...didn't you run a 12.4 in Topeka?

12.62...on factory Goodyears. Scared the :censored: out of me when it hit 2nd too!
Saleen Guru
February 2nd, 2006, 08:37 PM
I want to try to get into the 12's this year on my Pirelli's with no Nitrous..I ran a sloppy 13.4 on my pirelli's last year...Maybe a little practice I might? BAAAAAGHHH who am I kiddin...I launched at 5 on the Mickey's and ran a 12.92...hhaaaaa I kill me sometimes! :crackhead: I might try to do it with the NOS though if it get's a good tune up...just need to fill the bottle and get out to Supertune and check the a/f ratio.
98ponyguy
February 2nd, 2006, 08:47 PM
yo saleen i have some 17's still not 18's still have them 816-569-3727 after 5 till 10 pm
Saleen Guru
February 2nd, 2006, 08:48 PM
Do you have any 17inch rims?
PNY UP
February 3rd, 2006, 05:09 PM
This looks like a pretty decent deal. You could probably sell the Mach wheels and get a couple bucks back...

http://forums.modulardepot.com/showthread.php?s=&threadid=78528