Supercharger survey

[FMGT1999]

What type of Supercharger do you have on your car?

[Kinger]

Vortech V-2 SQ w/ intercooler. Making 13lbs of boost with a custom power pipe. 410rwhp/400rwtq on a stock bottom 2V.............Boom to come!! LOL

[SheDevilGT]

ProCharger D1SC w/ 3 core SM IC #'s of boost- unknown

[Orions96cobra]

vortech V-1 S-trim needing an intercooler, 11psi@6500 456hp 377tq

[Neb50]

vortech V-1 S-trim needing an intercooler, 11psi@6500 456hp 377tq

I wouldn't run anymore power on the engine that you have now with out upgrading the rods and pistons.

[Kwiknotch]

Procharger D-1 with a 3 core intercooler :pbj:

Oh, and you forgot to answer for yourself Kyle.

[Toby]

Saleen Series VI 2.3L Twin-Screw at 4-?#'s of boost. :Jimmy_kicking_time_

[FMGT1999]

Did you all vote on the poll on the from page? It's on the www.KC-Mustangs.com (http://www.KC-Mustangs.com) main page.

Kyle

[64T-bolt]

V2-SQ, 3.12 pulley, water/meth, 15psi, new hp numbers to come, was 417rwhp last time. .w/ the 3.6, no meth/h20

[Faukingfast]

Procharger D-1 with a 3 core intercooler :pbj:

Oh, and you forgot to answer for yourself Kyle.


He said had ON your car!!! Not sitting in the garage!!:blah:

[Toby]

Did you all vote on the poll on the from page? It's on the www.KC-Mustangs.com (http://www.KC-Mustangs.com) main page.

Kyle

done! I'm alone.

[chargedgt]

Procharger D1 with 3 core intercooler. Boost unknown until I get it tuned. Could be 12 or 13 on stock bottom end!!!!!!!

[PNY UP]

P1SC with 3 core IC. Bought the 8 lb pulley kit, boost gage says 10. I'm not dissapointed.

[Kwiknotch]

He said had ON your car!!! Not sitting in the garage!!:blah:

Aren't you supposed to actually own a Mustang before you can comment on these things? :twak2:

[FMGT1999]

Procharger D-1 with a 3 core intercooler :pbj:

Oh, and you forgot to answer for yourself Kyle.

----------------------------------------------------------------------

I had to vote on other... :gnarly:

I'm running an Ebay.com special S/C, it's a slient high performance electronic S/C putting down 3 pounds of boost on a 12 volts system without an intercooler. I think I should be seeing high 13's with it... :hail: Holy Cow, I'm going to be fast... Better watch out Scott when I hit 88mph, I'm going to add a second battery and blow right past you. I'm looking to add a flux compositor soon as an intercooler for my new system.... :slap:

Kyle

[Kinger]

----------------------------------------------------------------------

I had to vote on other... :gnarly:

I'm running an Ebay.com special S/C, it's a slient high performance electronic S/C putting down 3 pounds of boost on a 12 volts system without an intercooler. I think I should be seeing high 13's with it... :hail: Holy Cow, I'm going to be fast... Better watch out Scott when I hit 88mph, I'm going to add a second battery and blow right past you. I'm looking to add a flux compositor soon as an intercooler for my new system.... :slap:

Kyle
I think my Home Depot special will blow yours off the road! We need to line em up!!

[bincky]

Procharger D1-SC
3-core intercooler
500 rwhp / 424 rwtq / 10-11 lbs @ 6,500 rpm

[ShopGirl]

I was thinking about riggin up a leaf blower to the Camry, so I can at least keep up with the local traffic! hahaha!

[Faukingfast]

Aren't you supposed to actually own a Mustang before you can comment on these things? :twak2:



That is the best you could come up with??? Way to state the obvious Mr. I won't tell what I am doing to my car, but I know!! You just won't admit I am right!!:nana_smiley:

[Kinger]

That is the best you could come up with??? Way to state the obvious Mr. I won't tell what I am doing to my car, but I know!! You just won't admit I am right!!:nana_smiley:
I think everyone knows what Doug is doing......................well except for Doug??? LOL:dummy:

[bincky]

I think everyone knows what Doug is doing......................well except for Doug??? LOL:dummy:

Oh you mean Mr. "top-secret cam specs, top-secret winter project, my parts are bigger than yours"???

[Kinger]

Oh you mean Mr. "top-secret cam specs, top-secret winter project, my parts are bigger than yours"???
Nope, but thanks for filling me in! I was thinkin I was the only one who didn't know yet? LMFAO

[Kwiknotch]

Hey now, I never said "my parts are bigger than yours", apart from that, the other stuff is true. I could tell you my cam specs, but it wouldn't matter to all you Mod motor guys anyway. :dummy:

[ShopGirl]

Hey now, I never said "my parts are bigger than yours", apart from that, the other stuff is true. I could tell you my cam specs, but it wouldn't matter to all you Mod motor guys anyway. :dummy:

Can't wait 'til you get it done! :pbj:

[PNY UP]

I was looking at the poll results. How come cracker gets to vote. I thought you had to have a car to particiapte (hehehe)?

[FMGT1999]

I allowed his vote because he's our very own KC-Mustangs Cracker... and well because I like him...:slap: D'oh. :gnarly:

[PNY UP]

Well, OK. I guess since he's an authorized sales and service vendor for Vortech he should get a vote. Besides, who else would work on Kinger's car?!?!?!?

[Kinger]

Well, OK. I guess since he's an authorized sales and service vendor for Vortech he should get a vote. Besides, who else would work on Kinger's car?!?!?!?
Wouldn't have it any other way!!:pbj: :slap:

[PNY UP]

You remind me of Tom Cruise in "Days of Thunder"....

"Put some wedge in here, take some stagger out there...I have no idea what you're talking about. I'm an idiot, I don't have the vocabulary"

:Jimmy_kicking_time_

[Kinger]

You remind me of Tom Cruise in "Days of Thunder"....

"Put some wedge in here, take some stagger out there...I have no idea what you're talking about. I'm an idiot, I don't have the vocabulary"

:Jimmy_kicking_time_
:agree:
At least I don't act like I know what things are! I admit, I know shit about most of the car, I just drive the **** thing! (very well, hehe) LOL I leave the technical stuff to you guys!!

[PNY UP]

Well, I can tell you we all enjoy watching you drive. You push yours a lot harder than I push mine, mostly because I know I'll be fixing it when I break it!

[Kinger]

Well, I can tell you we all enjoy watching you drive. You push yours a lot harder than I push mine, mostly because I know I'll be fixing it when I break it!
Oh, It will be alot more mellow this year! Last year, I was comfortable enough to be able to pay for any damage mechanically, or use my good buddy Warren T. This year, it's all out the window and straight outa my pocket! :censored: :( ***** time to be conservative!!:shrug:

[PNY UP]

PUHLEEEEEASE! You're gonna flog that thing harder than ever now and you know it!

[Saleen Guru]

:agree: :withstupid: At least now you can leave at idle and still run 13.0's....Haa/Haa

[PNY UP]

Dayyyyuuuum!

So you hittin the car show circuit again this year? :Jimmy_kicking_time_

[Kinger]

:agree: :withstupid: At least now you can leave at idle and still run 13.0's....Haa/Haa
LMAO, only if I wanna be a sandbagger like someone else around here trying to win a 13.00 index!!:slap:

[PNY UP]

LMAO, only if I wanna be a sandbagger like someone else around here trying to win a 13.00 index!!:slap:

I'm just trying to fit in with the VAMP crowd!

[Kinger]

I'm just trying to fit in with the VAMP crowd!
:smilielol: :smilielol: :thumb_up:

[Saleen Guru]

Dayyyyuuuum!

So you hittin the car show circuit again this year? :Jimmy_kicking_time_

Not sure...thinking if I can get my junk consistant I might do true street and wild street just to say I did...Scott is gonna do some of those this year I think.

[xclr8menow]

KB 1500 .. depending on the pulley 6-10#'s .. 300rwhp/400rwtq .. still need to get back up and finalize the tune ..

[HI OFCR]

procharger d1sc with 3core pllied for 10lbs peak at 12lbs.

[TonysOrangeCapri]

Vortech S-trim, Renegade pulleys, My dyno numbers are 462hp 471tq with only 6lbs of boost. I have seen 12-13 lbs of boost with a tight belt, however it ran really lean. I plan on 42's real soon and cranking up the boost. :2up:

[spankustang]

I would use the Vortech S trim!
I made 521rwhp and 648rwtq thru a C4 with a completely stock 302 shortblock, canfield heads, Systemax intake, LT headers, and 50# injectors. NEVER had a problem with it!!

[oldbones]

IX gen eaton ported with stock intercooler and lfp heat exchanger with methanol injection 507rwhp and 520rwtq at 15lb on stock motor with a street tune.

[Projectnotch]

I just got mine on, and getting used to it. I will get it to the track for some numbers soon, and also need to get a tune!!!

Vortech V1-S trim w/ Anderson powerpipe, 80mm mass air, 42lb injectors


THANKS DOUG FOR YOUR HELP!!!!

[Perdieu]

436/402 non blown :hail:

But I'll be getting a D1-SC in a few months :woohoo: